Laserfiche WebLink
Aft <br /> 2. STEAM SPECIFICATIONS <br /> 2.1 The BUYER agrees to purchase its steam requirements from the SELLER <br /> provided the 'SELLER complies with the terms and conditions of this <br /> AGREEMENT. <br /> 2.2 SELLER agrees to furnish steam up to the BUYER'S maximum require- <br /> ments, or up to the maximum amount available from its heat recovery <br /> boiler whichever is less, at a pressure of 250 prig. min. Said* <br /> steam shall be 99.5% saturated which shall mean that it will contain <br /> not more than 1/2 of 1% moisture. <br /> 2.3 Steam supplied by SELLER shall be noncorrosive and nonscaling. The <br /> SELLER shall condition the steam so that all chloride content or any <br /> other chemical agent is removed to prevent damage to the piping, <br /> equipment, or systems of the BUYER. The SELLER shall provide <br /> monitoring equipment and maintain surveillance of steam quality <br /> parameters at no expense to the BUYER. The steam shall be tested <br /> and held within the following parameters: <br /> Test Method Control Limits <br /> pH 7.5 - 8.5 , <br /> Harndess 0 - 3 <br /> TDS (Total Dissolved Solids) 2000 - 2500 <br /> Sulphite 25 - 50 <br /> Phosphate 10 - 20 <br /> 2.4 Steam shall be made available to the SELLER 24 hours per day, .five <br /> days per week from 5:00 p.m. Sunday to 12:00 midnight Friday with <br /> any interruptions or any changes of this service to be in accordance <br /> with the provision of Section 4.4 of this AGREEMENT. <br /> 2.5 Nothing contained in this AGREEMENT shall be.deemed to limit or <br /> impair the BUYER'S ability to operate its own steam systems. This <br /> AGREEMENT shall not obligate the BUYER to purchase steam in excess <br /> of its requirements from the SELLER. <br /> 2 - <br /> i <br />